Dr. Manoj Mugale
Assistant Professor
Department of Engineering and Technology
Contact Information
Dr. Manoj Mugale
Assistant Professor
Department of Engineering and Technology
Education
- Ph.D. Mechanical Engineering, Cleveland State University, USA
- M.S. Manufacturing Technology, National Institute of Technology, Trichy, India
- M.S. Mechanical Engineering, Dr. BAMU University, Aurangabad, India
Research & Academic Interests
- Advanced Engineering Materials
- Additive Manufacturing
- Powder Metallurgy
- Advanced Manufacturing/Smart Manufacturing
Publications
- Mugale, M. et al., Tweaking AlNi Atomic Fraction to Enhance the Mechanical Properties of Low-Density Non-Equilibrium AlCuFeNiTi-based High Entropy Alloy. Journal of Alloys and Compounds, (2025) 180109.
- Jadhav, Sainand, et al. "Recent Progress and Scientific Challenges in Wire-Arc Additive Manufacturing of Metallic Multi-Material Structures." Journal of Manufacturing and Materials Processing, 9.8 (2025) 284.
- Mugale, M. et al., High Strength-Ductility Combination in Low-Density Dual Phase High Entropy Alloy. Journal of Alloys and Compounds, 2024, 177762.
- Karki, S., Mugale, M. et al. Effect of Graphene Nanoplatelets Fraction on the Microstructure and Mechanical Properties of Inconel 718 Composites Prepared by Spark Plasma Sintering. Materials Science and Engineering: A (2025) 148531.
- Helmer A., Mugale, M. et al., A Magnesium Alloy with high Corrosion resistance, Hardness and Elastic Modulus Enabled by Elemental Synergy. Materials Letters, (2025): 139102.
- Helmer, A., Agrawal, R., Mugale, M. et al. "Corrosion behavior of MgTiZn and Mg4TiZn alloys after ball milling and subsequent spark plasma sintering." Materials 18.14 (2025): 3279.
- Choudhari, A., Elder, J., Mugale, M., et al. Additive manufacturing of AISI M2 tool steel by Binder Jetting (BJ): Investigation of microstructural and mechanical properties. Journal of Manufacturing Processes, 132 (2024) 686-711.
- Mugale, M. et al., Investigation of Protective Coatings for Reducing High-Temperature Oxidation of Steels. JOM 2024, 1-12.
- Choudhari, A.; Karki, S.; Mugale, M. et al., Evaluation and Comparison of High-Temperature Coatings for Decarburization Prevention in Low Alloy Steels. JOM 2026.
- Digole, S., Karki, S., Mugale, M. et al., Spark Plasma Sintering of Pure Titanium: Microstructure and Mechanical Characteristics. Materials 2024, 17, 3469.
- Choudhari, A., Elder, J., Mugale, M. et. al. Enhancing Quality Control: Image-Based Quantification of Carbides and Defect Remediation in Binder Jetting Additive Manufacturing. Materials 2024, 17, 2174.
- Walunj, G., Mugale, M., et al., Spark Plasma Sintering of Mechanically Alloyed High Entropy Nitrides to Investigate the Mechanical, Tribological, and Oxidation Properties. JOM 2023, 1-15.
Education
- Ph.D. Mechanical Engineering, Cleveland State University, USA
- M.S. Manufacturing Technology, National Institute of Technology, Trichy, India
- M.S. Mechanical Engineering, Dr. BAMU University, Aurangabad, India
Research & Academic Interests
- Advanced Engineering Materials
- Additive Manufacturing
- Powder Metallurgy
- Advanced Manufacturing/Smart Manufacturing
Publications
- Mugale, M. et al., Tweaking AlNi Atomic Fraction to Enhance the Mechanical Properties of Low-Density Non-Equilibrium AlCuFeNiTi-based High Entropy Alloy. Journal of Alloys and Compounds, (2025) 180109.
- Jadhav, Sainand, et al. "Recent Progress and Scientific Challenges in Wire-Arc Additive Manufacturing of Metallic Multi-Material Structures." Journal of Manufacturing and Materials Processing, 9.8 (2025) 284.
- Mugale, M. et al., High Strength-Ductility Combination in Low-Density Dual Phase High Entropy Alloy. Journal of Alloys and Compounds, 2024, 177762.
- Karki, S., Mugale, M. et al. Effect of Graphene Nanoplatelets Fraction on the Microstructure and Mechanical Properties of Inconel 718 Composites Prepared by Spark Plasma Sintering. Materials Science and Engineering: A (2025) 148531.
- Helmer A., Mugale, M. et al., A Magnesium Alloy with high Corrosion resistance, Hardness and Elastic Modulus Enabled by Elemental Synergy. Materials Letters, (2025): 139102.
- Helmer, A., Agrawal, R., Mugale, M. et al. "Corrosion behavior of MgTiZn and Mg4TiZn alloys after ball milling and subsequent spark plasma sintering." Materials 18.14 (2025): 3279.
- Choudhari, A., Elder, J., Mugale, M., et al. Additive manufacturing of AISI M2 tool steel by Binder Jetting (BJ): Investigation of microstructural and mechanical properties. Journal of Manufacturing Processes, 132 (2024) 686-711.
- Mugale, M. et al., Investigation of Protective Coatings for Reducing High-Temperature Oxidation of Steels. JOM 2024, 1-12.
- Choudhari, A.; Karki, S.; Mugale, M. et al., Evaluation and Comparison of High-Temperature Coatings for Decarburization Prevention in Low Alloy Steels. JOM 2026.
- Digole, S., Karki, S., Mugale, M. et al., Spark Plasma Sintering of Pure Titanium: Microstructure and Mechanical Characteristics. Materials 2024, 17, 3469.
- Choudhari, A., Elder, J., Mugale, M. et. al. Enhancing Quality Control: Image-Based Quantification of Carbides and Defect Remediation in Binder Jetting Additive Manufacturing. Materials 2024, 17, 2174.
- Walunj, G., Mugale, M., et al., Spark Plasma Sintering of Mechanically Alloyed High Entropy Nitrides to Investigate the Mechanical, Tribological, and Oxidation Properties. JOM 2023, 1-15.